廈門晶鼎自動化科技有限公司特價供應，有需要前來咨詢，聯系人：黃先生 電話：/ Q

電纜室照明燈 CL10-W
Cable Cabinet Lamp CL10-W
CL10-W作為傳統電纜室照明燈的替代方案，采用LED作為發光光源，并采取特殊的結構，實現低成本、高可靠、易用性的應用設計。
應用場合
Application
技術數據
Technical data
CL10-W
電源
power supply
AC/DC110V~230V
功耗
Power consumption
<3W
接線端子
Terminals
導線截面較大至4mm2
Conductors up to 4mm2
防護等級
Protection class
IP20
環境溫度
Ambient temperature
-25 °C to +50°C
LED使用壽命
LED life span
>50,000h
耐壓強度
Insulating strength
AC2000V, 50Hz, 1Min
發亮?xí)r間
Lighting continuance
1800s±15% （也可按客戶要求定制）
1800s±15% (variable for demand of customer)
再次啟動間隔時間
Re-start interval
不超過8秒鐘
Less than 8 seconds
外殼材料
Material of enclosure
材料性能符合DIN7708標準
Insulating material according to DIN7708
連接電纜
Connecting cable
阻燃電纜2×0.5mm2，3.5米(長度可依用戶需求提供)
Flame retardant cable, 3.5m(length variable for demand )
光照度
Illuminance
距離光源30cm處，≥350lx
30cm away from light source, ≥350lx
The light source control unit mounts in the safe operation re-gion, illuminance head mounts in the suitable place that the end illuminates a region in demand. Connect power, illumi-nance head take power from the light source control unit, illu-minating a region selected. After connecting power, keeping on time that gives out light is for 30 minutes, and automatical-ly goes out . If want restart, connect power again after dis-connecting power no less than 8 seconds.
Suggest: to disconnect power after every time use .
將光源控制單元安裝于便于安全操作區域，發光頭安裝于需要照明區域的合適位置。接通電源，光源控制單元通過連接電纜點亮發光頭，照亮選定區域。接通電源后，發光持續時間30分鐘后自動熄滅。若要重新啟動，必須在斷開電源不少于8秒后再接通電源。
建議:在每次使用后斷開電源。
使用方法
Use Method
The CL10-W is the substitute for the traditional cable cabinet lamp, adopt LED as light source, and adopt special structure, carry out low cost and high reliability and use easily .
安裝
Installation
電纜室照明燈由光源控制單元、連接電纜和發光頭組成。光源控制單元配有接線端子可直接連接電源，其中A1（+）接AC“L”或DC“+”，A2(-)接AC“N”或DC“-”，+接連接電纜紅線，-接連接電纜黑線。光源控制單元安裝在DIN 35mm標準導軌上，發光頭可用螺栓夾緊的方式安裝在電纜室需要光照的地方。
Cable cabinet lamp consists of light source control unit and connecting cable and illuminance head.The light source control unit has the wiring terminal that can connect a power supply directly, among them, the A1(+)connect the AC"L" or DC"+", the A2(-) connects the AC"N" or DC"-",the + connect the red line of connecting cable, the - connect the black line of connecting ca-ble. The control unit can mount at a standard DIN 35 mms rail.The illuminance head can fix tightly in the suitable place that the head illuminates a region in the demand with screw .